Encoding is very slow with AME CC 2014. Resource monitor shows only one of the eight CPUs working while the rest are parked. This was not happening in CC version. Is there anything I can do to control this? I happen to be exporting to h264 Bluray. Says it has 2 1/2 hours remaining, which is way tool long for this project.
Hello,
I am exporting a mpeg HDV file that has a constant frame rate to a H264 video (.mp4) video to upload to a web-base video player. I'm actually using the preset in Media Encoder "YouTube HD 720p 29.97".
The online video web interface I use requires a constant frame rate. But when looking at the video in MediaInfo it shows the video file as a variable frame rate. After looking through the settings in Media Encoder I cannot find any option to correct that. I see where you can change the frame rate and it is at 29.97. So you would think it would be constant but it is not. And it does not have any settings, that I can see, to change from variable to constant. I do see the bitrate settings, but that is not the issue.
I also have Apple Compressor and that successfuly does a constant frame rate, but if possible I'd rather use Adobe Media Encoder. So does anybody know how to change this setting? Thank you
Hi - I need to know if the Adobe Media Encoder supports WebM files, and if it can convert a WebM file (of at least 250mb) to a standard video file, such as mp4 or Quicktime.
Thank you!
Hi, I recently installed the trial of premiere for CC 2017 and Media encoder CC 2017, but I do not have the h265 in export options, I read is available since CC 2015.1
I just upgraded to CS5.5 a yesterday and having some issues encoding an 1 1/2 program for a DVD. The program doesn't seem to crash per se, just stops encoding. The task manager says it's running. I tried to encode the same sequence, but shorter and have the in and out points go through the part where it always stops and it worked fine. It's just when I try the entire sequence it stops. Anyone have any experience like this with CS5.5 just coming out?
Thank you,
Doug
Encoding is very slow with AME CC 2014. Resource monitor shows only one of the eight CPUs working while the rest are parked. This was not happening in CC version. Is there anything I can do to control this? I happen to be exporting to h264 Bluray. Says it has 2 1/2 hours remaining, which is way tool long for this project.
Running an HD render from the new AE via "Add to Media Encoder Queue" to the new Media Encoder.
Everything encodes perfectly...... except the audio?
(Tried rendering to H264 .mp4, AND .wmv, both have same issue)
Audio is checked on, so it's not a mistake with my render settings
Anyone else?
I have an 10 seconds video done in After Effects CC 2015 with 300 x 600px and need to work as a Web Banner.
We need to supply it as HTML5 and the Media Guide needs it with maximum 40Kb.
I have read many tutorials but since FLV and SWF are not in After Effects or Adobe Media Encoder, I don't know how the process would be.
Please help us.
Thank you,
I just upgraded to CS5.5 a yesterday and having some issues encoding an 1 1/2 program for a DVD. The program doesn't seem to crash per se, just stops encoding. The task manager says it's running. I tried to encode the same sequence, but shorter and have the in and out points go through the part where it always stops and it worked fine. It's just when I try the entire sequence it stops. Anyone have any experience like this with CS5.5 just coming out?
Thank you,
Doug
Guys,
Can we get Adobe Media Encoder to shutdown the pc after encoding done?
I have searched but have not found anything suitable?
Is there someone who has script that can monitor the exe and then shutdown pc after encoding done?
I am running media encoder on a mac. I have an .mp4 file which is also available as a .mov file but I need it to be an .avi file with linear PCM codec so that I can play it from a thumb drive on my projector. I used a converter to convert the file to .avi but it still doesn't play on the epson projector.
Can you help me achieve this?
There is no .avi option in my premier pro or the media encoder.
Thanks
Sue
I keep getting a failed error when trying to use Adobe Media Encoder.
I open up my premiere project and select the comp I want. I switch the format to Quicktime, select h.264 from preset. Hit the start button and I get the failed sound/icon.
2 questions:
1. My comp is 1920x1080 but when I go in it automatically has it as 720... why is it not recognizing the comp size?
2. Is there a way to fix this error? It seems to export occassionally to my C drive (which is not raid) but it fails to my F drive (Raid 10). But usually if I export as a wmv or something smaller it exports fine to F.
I am using the YouTube 1080p 30fps preset and twice now I have had an export of the same project fail. The error log states:
"File importer detected an inconsistency in the file structure of Accident Reenactment.mp4. Reading and writing this file's metadata (XMP) has been disabled.
Adobe Media Encoder
Could not write XMP data in output file."
The result is a small file of 24 bytes, so the video doesn't even get created. I have exported this same project to DVD and ProRes with no issue, so I have no idea what the problem is.
Here is the whole section from this export:
05/12/2014 12:44:25 PM : Queue Resumed
- Source File: Accident Reenactment
- Output File: /Volumes/Macintosh HD 2/Output Files/Accident Reenactment.m2v
- Preset Used: DVD
- Video: NTSC, 720x480, 29.97 fps, Upper, Quality 75
- Audio: PCM Audio, 48 kHz, Stereo, 16 bit
- Bitrate: VBR, 1 Pass, Min 2.80, Target 5.00, Max 7.00 Mbps
- Encoding Time: 01:19:24
05/12/2014 02:03:50 PM : File Successfully Encoded
- Source File: Accident Reenactment
- Output File: /Volumes/Macintosh HD 2/Output Files/Accident Reenactment.mov
- Preset Used: Quicktime Archive
- Video: 1920x1080 (1.0), 29.97 fps, Upper, Quality 90, Apple ProRes 422
- Audio: Uncompressed, 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 02:32:23
05/12/2014 04:36:24 PM : File Successfully Encoded
- Source File: Accident Reenactment
- Output File: /Volumes/Macintosh HD 2/Output Files/Accident Reenactment.mp4
- Preset Used: YouTube HD 1080p 29.97
- Video: 1920x1080 (1.0), 29.97 fps, Progressive
- Audio: AAC, 320 kbps, 48 kHz, Stereo
- Bitrate: VBR, 2 pass, Target 8.00 Mbps, Max 8.00 Mbps
- The source was deinterlaced
- Encoding Time: 04:12:14
05/12/2014 06:16:14 PM : File Encoded with warning
------------------------------------------------------------
File importer detected an inconsistency in the file structure of Accident Reenactment.mp4. Reading and writing this file's metadata (XMP) has been disabled.
Adobe Media Encoder
Could not write XMP data in output file.
Edited in Adobe Premiere Pro CC on an iMac running OSX 10.9.2.
Core i7 2.93 GHz
8GB RAM
Built in YouTube HD 1080p 29.97 preset in Media Encoder.
Any help would be great. Please let me know if you need any addition info.
Hello,
I am exporting a mpeg HDV file that has a constant frame rate to a H264 video (.mp4) video to upload to a web-base video player. I'm actually using the preset in Media Encoder "YouTube HD 720p 29.97".
The online video web interface I use requires a constant frame rate. But when looking at the video in MediaInfo it shows the video file as a variable frame rate. After looking through the settings in Media Encoder I cannot find any option to correct that. I see where you can change the frame rate and it is at 29.97. So you would think it would be constant but it is not. And it does not have any settings, that I can see, to change from variable to constant. I do see the bitrate settings, but that is not the issue.
I also have Apple Compressor and that successfuly does a constant frame rate, but if possible I'd rather use Adobe Media Encoder. So does anybody know how to change this setting? Thank you
I have an 10 seconds video done in After Effects CC 2015 with 300 x 600px and need to work as a Web Banner.
We need to supply it as HTML5 and the Media Guide needs it with maximum 40Kb.
I have read many tutorials but since FLV and SWF are not in After Effects or Adobe Media Encoder, I don't know how the process would be.
Please help us.
Thank you,
For some reason my h.264 videos do not look good on Youtube when played in HD.
Is there anyway to convert my mp4 or avi videos to VP9 or h.265 - Just to even test it!
I already use adobe after effects but couldn't find the option in media encoder.
Appreciate any help, thanks.
I keep getting a failed error when trying to use Adobe Media Encoder.
I open up my premiere project and select the comp I want. I switch the format to Quicktime, select h.264 from preset. Hit the start button and I get the failed sound/icon.
2 questions:
1. My comp is 1920x1080 but when I go in it automatically has it as 720... why is it not recognizing the comp size?
2. Is there a way to fix this error? It seems to export occassionally to my C drive (which is not raid) but it fails to my F drive (Raid 10). But usually if I export as a wmv or something smaller it exports fine to F.
I am using the YouTube 1080p 30fps preset and twice now I have had an export of the same project fail. The error log states:
"File importer detected an inconsistency in the file structure of Accident Reenactment.mp4. Reading and writing this file's metadata (XMP) has been disabled.
Adobe Media Encoder
Could not write XMP data in output file."
The result is a small file of 24 bytes, so the video doesn't even get created. I have exported this same project to DVD and ProRes with no issue, so I have no idea what the problem is.
Here is the whole section from this export:
05/12/2014 12:44:25 PM : Queue Resumed
- Source File: Accident Reenactment
- Output File: /Volumes/Macintosh HD 2/Output Files/Accident Reenactment.m2v
- Preset Used: DVD
- Video: NTSC, 720x480, 29.97 fps, Upper, Quality 75
- Audio: PCM Audio, 48 kHz, Stereo, 16 bit
- Bitrate: VBR, 1 Pass, Min 2.80, Target 5.00, Max 7.00 Mbps
- Encoding Time: 01:19:24
05/12/2014 02:03:50 PM : File Successfully Encoded
- Source File: Accident Reenactment
- Output File: /Volumes/Macintosh HD 2/Output Files/Accident Reenactment.mov
- Preset Used: Quicktime Archive
- Video: 1920x1080 (1.0), 29.97 fps, Upper, Quality 90, Apple ProRes 422
- Audio: Uncompressed, 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 02:32:23
05/12/2014 04:36:24 PM : File Successfully Encoded
- Source File: Accident Reenactment
- Output File: /Volumes/Macintosh HD 2/Output Files/Accident Reenactment.mp4
- Preset Used: YouTube HD 1080p 29.97
- Video: 1920x1080 (1.0), 29.97 fps, Progressive
- Audio: AAC, 320 kbps, 48 kHz, Stereo
- Bitrate: VBR, 2 pass, Target 8.00 Mbps, Max 8.00 Mbps
- The source was deinterlaced
- Encoding Time: 04:12:14
05/12/2014 06:16:14 PM : File Encoded with warning
------------------------------------------------------------
File importer detected an inconsistency in the file structure of Accident Reenactment.mp4. Reading and writing this file's metadata (XMP) has been disabled.
Adobe Media Encoder
Could not write XMP data in output file.
Edited in Adobe Premiere Pro CC on an iMac running OSX 10.9.2.
Core i7 2.93 GHz
8GB RAM
Built in YouTube HD 1080p 29.97 preset in Media Encoder.
Any help would be great. Please let me know if you need any addition info.
In Media Encoder, when I'm attempting to configure a preset to automatically publish to Vimeo upon encode, I click on the button to "login," and the web page that loads seems to lack formatting. If I scroll down to find the login fields, and attempt to log in regardless, I receive an error that my form session expired, despite that I just opened the window. I've had this problem on another computer with a different version of the application. I'm currently on a 2016 Mac Pro OSX 10.11.6. AME v 2017.1, build 11.1.0.107. Any thoughts on what could be wrong? Thanks!
Is it possible to convert MOV file to WMV file?
If so, what is the best way/ application would recommend?
